Pet Dog Food Extruder Machine

1. Certification: CE ISO SGS.
2. Motor: Siemens, ABB or Chinese Brand.
3. Screw material: Alloy-38CrMoAl.
4. Bearings: NSK.
5. After-sales Service Provided: 24 Hours.
6. Key Selling Points: High Productivity.

Send Inquiry

Description

Product Description

The fully automatic pet food production line uses flour, corn flour, soybean meal, meat meal, fish meal, bone meal, etc. as raw materials. The automatic mixing system is used to realize the automatic scientific proportioning of the ingredients. The twin-screw extrusion extruder extrudes various shapes and then bakes Drying and spraying can produce formula pet food of various shapes, balanced nutrition and good palatability; pet food produced by twin-screw extrusion technology can well retain the nutrients in the formula raw materials, easy to digest and absorb, and the formula shape is easy Change.

Product Video

Sample Product

Raw materials: corn flour, soybean flour, wheat bran, meat, grain flour, etc.

Dog food suitable for dogs at different growth stages. Change the mold to make different shapes of dog food. It can also produce fish feed, cat food, fox feed, etc. Dog food shape: heart shape, bone shape, round shape, triangle shape, small fish shape, square shape, sandwich shape, etc.

Machine Parameters

Different capacity production line for customer choose.

Model	Installed Power	Power Consumption	Output	Size
DSE - 65	74 kw	52 kw	100-150 kg/hr	17x1.3x2.2(m)
DSE - 70/75	105 kw	75 kw	200-250 kg/hr 250-350 kg/hr	20x1.5x2.2(m)
DSE - 85	205kw	150 kw	350-500kg/hr	30x1.5x2.6(m)
DSE - 95	165kw	90kw	1000-1500kg/hr	40x3.5x4.5(m)
DSE - 132	280kw	132kw	3000-3500kg/hr	45x4.5x6(m)

Features of Some Machine

Name: Double-layer mixer

Main motor: 11kw

Output: 500kg/time (5~8min each time)

Material: Stainless steel

Capacity: both 1005L

Function: Mainly used for mixing various powdery or granular raw materials, dry and wet, mixing and mixing on the top, the bottom is the storage silo to add the discharge dragon, the height of the discharge opening can be customized according to requirements.

Name: Bucket elevator

Main motor: 2.2kw

Output: 1000-2000kg/h

Material: PVC

Function: The material is conveyed from low to high, and the environment is sealed in the whole process, no leakage and pollution, and product quality is guaranteed.

Name: DSE95S double screws extruder

Main motor: 90kw (frequency control)

Feeding motor: 1.5kw (frequency control)

Rotary cutting motor: 3kw (frequency control)

Output: 1000~1500kg/h

Screw length: 2100mm

Screw diameter: 95mm

Screw material: 38CrMoAl

Modulator power: 3kw

Heating: steam heating, high efficiency, reliable performance.

Oil pump motor: 0.75kw, with the condenser, filter element, internal circulation, and forced lubrication, reducing the temperature of the oil, cooling the distribution box and the bearing. and prolonging the service life.

Name: 10-20kg/bag packing machine

1. Packing speed: 200~280 bags/hour for single bucket scale, 400~550 bags/hour for double bucket scale

2. Dynamic accuracy: +0.2%.

3. Power supply voltage: AC220V, 380V, 50HZ.

4. Gas source pressure: 0.4~0.6Mpa.

5. Gas sourceless: 0.1m3/min.

Machine advantages:
1: Adopt advanced rotary cutting structure, adopt soft knife bonding form, realize infinitely variable speed, can cut the output material into desired length products at will, and is not easy to produce burrs
2: The design is novel, unique, simple in structure, easy to assemble and disassemble, and easy to operate.
3: The screw sleeve and screw are made of special wear-resistant and high-temperature-resistant alloy steel materials and are heat-treated, which has the advantages of wear resistance and long life
4: Equipped with a unique pressurized die device to ensure the feed output and quality, and equipped with an electric heating device to improve the feed expansion rate.
5: The speed of the feeding device can be adjusted, which is more convenient to operate, and the feeding is uniform to prevent the machine from being held back.
6: The discharge mold is easy to replace, and the feed with different apertures only needs to replace the mold with the required aperture.

About machine quality control

1. Design Control

The technicians carry out scientific and reasonable design according to the specific requirements of the users and the actual situation of the test, and compile the process card of the whole process of equipment manufacturing.
2. Purchasing Control
Establish a list of suppliers, conduct strict inspection and comparisons of suppliers, follow the principle of high quality, and establish supplier files. There must be no less than three suppliers that can normally supply the same type of outsourced parts.
3. Production control
Production must be based on technical documents, and the processed qualified products of each process must be marked, and the key parts must be clearly marked to ensure product traceability.

Certifications

During more than 16 years food machine production, we got much experiences and many certificates, like the CE, SGS, High-tech certification from China government. We will cherish the recognition from all walks of life, and do our best to serve customers around the world.

Packing & Shipping

1. We will pack all necessary machines into wooden cases of feed-making machines for fish. For the drying machine, and heavy extruders, we will fix them in the container with very strong iron wire.

2. If by LCL for small quantity machines, we will let send to QINGDAO port for loading.